PRO2 Check Elite multifunction concentration indicator Salter Labs
The PRO2ELITE is suitable for everybody who wants to check three essential parameters on an oxygen concentrator: oxygen purity, volume and output pressure.
The PRO2 check Elite Multifunction Concentrator Indicator is designed for intermittent usage to determine the oxygen concentration, flow, and outlet pressures produced by an oxygen concentrator. It may also be utilized to do spot checks of gaseous or liquid oxygen.
Most important characteristics:
- All-in-1: measures oxygen purity, volume and output pressur in PSI or kPa
- No calibration needed
- Operates on one 9-volt battery
How does it workt?
Switch on the oxygen concentrator and leave it running long enough according to the manufacturers guidelines before starting the measurement. It is recommended to set the concentrator to at least 2 LPM. If a humidifier is connected it needs to be removed for a more accurate reading and to prevent moisture damage to the indicator.
Connect the PRO2 Check Elite indicator to the output of the oxygen concentrator using the included oxygen tubing. By pressure the on/off button once the measured oxygen concentration is displayed. To measure the flow, simply press the Flow button. The indicator’s screen will now display the volume in litres per minute (in tenths of a litre).
The output pressure is measured through a second connector on the indicator. Place the oxygen tubing on the right connector and press the Pressure button. You will now see the pressure (displayed in tenths) in PSI (Pounds per Square Inch) or kPa (Kilopascal).
What is included:
- Salter Labs PRO2ELITE
- Carrying case and strap
- 9-volt battery
- Connecting tubing
- Operation manual